Skip to main content

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的14本指南

英语
中文

正翻译步骤 6

Step 6
If present, peel the piece of black tape covering the hidden screw near the power button. Remove the 2.6 mm Phillips screw securing the logic board near the power button.
  • If present, peel the piece of black tape covering the hidden screw near the power button.

  • Remove the 2.6 mm Phillips screw securing the logic board near the power button.

  • (Use caution when removing this screw and removing the power contact held by it; the contact tab will come loose with the screw)

  • Notice the small rubber bumper under the screen & digitizer cables (which are detached at top above the Q-code). This bumper can fall off of the logic board when removed or get stuck to the cables and fall off later.

如果有,请撕下电源按钮附近的隐藏螺丝的黑色胶带。

卸下位于电源键附近固定逻辑板的2.6 mm Phillips螺丝。

请小心,当拆卸这个螺丝和取出其所固定的电源触点时,触点舌片可能会松动。

请注意,在屏幕和数字转化线缆下方的橡胶保险杠(分离在Q码顶部)。 这个保险杠可能当您移动或者卡在线缆上,随后脱落。

在开源创作共享许可协议下,你的投稿已被许可