跳转到主内容

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的14本指南

英语
中文

正翻译步骤 1

步骤 1
Remove the five cables near the top of the logic board in the following order: Headphone jack/volume button cable
  • Remove the five cables near the top of the logic board in the following order:

  • Headphone jack/volume button cable

  • Front facing camera cable

  • Digitizer cable

  • Display data cable

  • Power button cable (located underneath the headphone jack/volume button cable as shown in the second picture.)

  • To disconnect the cables, use the edge of a plastic opening tool to gently lift their connectors up and out of the sockets on the logic board.

  • Be careful not to break any of the small and delicate surface mount components as you disconnect the cables.

按照以下顺序来取下逻辑板附近的五根线缆。

耳机插口/音量键 线缆

前置摄像头线缆

数字化线缆

显示线缆

电源键线缆 (在耳机插口/音量键线缆下方 如图二)

要断开线缆连接,请使用塑料开启工具的边缘来将线缆与基座分离。

小心,在您断开线缆时请勿损坏任何小的贴片元件。

在开源创作共享许可协议下,你的投稿已被许可