iPhone 4S 逻辑板更换

注：你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的14指南。

英语

中文

下一步

正翻译步骤 1

步骤 1

Remove the five cables near the top of the logic board in the following order:
Headphone jack/volume button cable
Front facing camera cable
Digitizer cable
Display data cable
Power button cable (located underneath the headphone jack/volume button cable as shown in the second picture.)
To disconnect the cables, use the edge of a plastic opening tool to gently lift their connectors up and out of the sockets on the logic board.
Be careful not to break any of the small and delicate surface mount components as you disconnect the cables.

按照以下顺序来取下逻辑板附近的五根线缆。
耳机插口/音量键 线缆
前置摄像头线缆
数字化线缆
显示线缆
电源键线缆 （在耳机插口/音量键线缆下方 如图二）
要断开线缆连接，请使用塑料开启工具的边缘来将线缆与基座分离。
小心，在您断开线缆时请勿损坏任何小的贴片元件。