注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的14本指南

英语
中文

正翻译步骤 3

步骤 3
Use the tip of a spudger to pry the small grounding clip up off the logic board. Carefully grasp the grounding clip and remove it from the iPhone.
  • Use the tip of a spudger to pry the small grounding clip up off the logic board.

  • Carefully grasp the grounding clip and remove it from the iPhone.

  • Before reassembly, be sure to clean all metal-to-metal contact points on the grounding clip (not the mating halves of connectors) with a de-greaser such as windex or isopropyl alcohol. The oils on your fingers have the potential to cause grounding issues.

使用撬棒尖头来将小接地夹撬出。

小心的夹住接地夹然后将其与iPhone分离。

再重新组装前请使用脱气剂(如windex或异丙醇)清洁接地夹上所有的金属触点(不是连接器的两端)。 您手机上的油脂可能造成接地问题。

在开源创作共享许可协议下,你的投稿已被许可