注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的8本指南。
正翻译步骤 1
步骤 1
-
Unscrew the two 3mm Phillips #1 head screws along the top edge of the device.
- | [* red] Unscrew the two 3mm Phillips |
---|---|
+ | [* red] Unscrew the two 3mm Phillips #1 head screws along the top edge of the device. |
[* icon_caution] The screws on the back panel strip easily. Go slowly and press down firmly. | |
[* icon_note] The screws on the back panel are held in by locking washers, so they won't come out of the back panel. |
您的所有投稿皆享有基于开源创作共享许可协议(CC BY-NC-SA)的著作权利。