跳转到主内容

iPad 3 4G版 前面板的移除

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的153本指南

英语
中文

正翻译步骤 13

步骤 13
Removing iPad 3 4G Front Panel: 步骤 0 中的图像 1,2 Removing iPad 3 4G Front Panel: 步骤 0 中的图像 2,2
  • This step requires you to move the opening pick along the bottom right edge of the front panel. The Wi-Fi antenna is very close to the corner and is easily severed if the adhesive is released improperly.

  • Do not completely remove the pick from under the front glass, but pull it out just a little bit so that ~1/8" (3 mm) of the tip is still under the front glass.

  • Slide the tip of the opening pick along the bottom edge of the iPad, releasing the adhesive over the Wi-Fi antenna.

在此插入翻译

在此插入翻译

在此插入翻译

您的所有投稿皆享有基于开源创作共享许可协议(CC BY-NC-SA)著作权利