跳转到主内容

修复你的物品

维修的权力

配件 & 工具

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的3本指南

英语
中文

正翻译步骤 2

步骤 2
Remove the following two screws: One 3.3 mm Phillips screw One 2.1 mm Phillips screw
  • Remove the following two screws:

  • One 3.3 mm Phillips screw

  • One 2.1 mm Phillips screw

  • Lift the metal retainer clip straight up from its recess in the rear panel.

  • If the camera comes up with the retaining clip, don't worry. Just separate the camera from the clip before reinstalling, so you can be sure to get the connector in the right place.

  • Be sure the small thermal pad is attached to the metal retaining clip as seen in the third picture when replacing the rear camera.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可