跳转到主内容

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的20本指南

英语
中文

正翻译步骤 5

步骤 5
The connectors at the ends of the following cables are attached very firmly to the sockets on the logic board. Pulling directly on the cable will either separate the cable from its connector or the socket from the logic board.
  • The connectors at the ends of the following cables are attached very firmly to the sockets on the logic board. Pulling directly on the cable will either separate the cable from its connector or the socket from the logic board.

  • Use the sharp end of a spudger to disconnect the speaker cable connector.

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可