跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的3指南

英语
法语

正翻译步骤 2

步骤 2
Flip the  circuit board over and use a Phillips #2 Screwdriver to remove the 6.9mm screw holding the board to the back case.
  • Flip the circuit board over and use a Phillips #2 Screwdriver to remove the 6.9mm screw holding the board to the back case.

  • Slide the back cover out and away from the circuit board.

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可