修复你的物品

维修的权力

商店

注：你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的20本指南。

返回指南
英语
中文
上一步

正翻译步骤 6

步骤 6
Use the exposed clear plastic pull tab to peel the battery off the adhesive securing it to the iPhone. Be careful not to pull the plastic pull tab too hard as it can be ripped off very easily.

  • Use the exposed clear plastic pull tab to peel the battery off the adhesive securing it to the iPhone.

  • Be careful not to pull the plastic pull tab too hard as it can be ripped off very easily.

  • Remove the battery.

  • If your replacement battery came in a plastic sleeve, remove it before installation by pulling it away from the ribbon cable.

  • If your replacement battery came with an uncreased cable, carefully crease the cable into the proper shape before installing the battery into the phone.

  • While installing the replacement battery, temporarily connect the battery connector to the phone to ensure proper alignment. Once the battery is glued in place, disconnect the battery connector.

  • Perform a hard reset after reassembly. This can prevent several issues and simplify troubleshooting.

借由拉着外漏在外头的透明塑料条，将电池从手机取出。

请注意，不要把透明塑料条拉扯太用力，因为这很容易不小心就被扯掉了。

卸下电池。

如果你的更换电池采用塑料套管，请在安装前将其从带状电缆中拉出来将其取下。

如果你的更换电池配有未加电的电缆，请在将电池安装到手机中之前小心地将电缆折叠成适当的形状。

安装更换电池时，请将电池接口暂时连接到手机以确保正确对齐。将电池胶合到位后，断开电池接口。

在组装好手机之后执行一次重启。这可以很简单地避免诸多可能的问题。

在开源创作共享许可协议下，你的投稿已被许可。