修复你的物品

维修的权力

配件 & 工具

注：你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的14指南。

返回指南
英语
中文
上一步

正翻译步骤 4

步骤 4
Use the edge of a plastic opening tool to pry the rear camera connector up from its socket on the logic board. Be careful not to break any components off the surrounding area on the logic board as you pry upwards.

  • Use the edge of a plastic opening tool to pry the rear camera connector up from its socket on the logic board.

  • Be careful not to break any components off the surrounding area on the logic board as you pry upwards.

  • Remove the rear camera from the iPhone.

  • There is a small rubber gasket that sits underneath the rear-facing camera. Make sure that it is properly seated before reassembly.

使用塑料打开工具的边缘将后置摄像头连接器从逻辑板上的插槽向上撬起。

当您向上撬动时，请小心不要破坏逻辑板周围区域的任何部件。

从iPhone上取下后置摄像头。

后置摄像头的下方有一个小橡胶垫圈。重新组装之前请确保它已正确就位。

在开源创作共享许可协议下，你的投稿已被许可。