修复你的物品

维修的权力

商店

注：你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的20本指南。

返回指南
英语
中文
上一步 下一步

正翻译步骤 4

步骤 4
Before you reattach the battery connector during reassembly, carefully position the pressure contact back in place. It should rest on top of the Philips screw post shown, and the gold contact should point towards the battery connector. Be sure to clean the pressure contact with a degreaser such as windex or isopropyl alcohol. The oils on your fingers have the potential to create wireless interference.

  • Before you reattach the battery connector during reassembly, carefully position the pressure contact back in place. It should rest on top of the Philips screw post shown, and the gold contact should point towards the battery connector.

  • Be sure to clean the pressure contact with a degreaser such as windex or isopropyl alcohol. The oils on your fingers have the potential to create wireless interference.

在重新安装过程中重新连接电池接口之前，请小心地将压力触点放回原位。它应该放在所示的菲利普螺丝柱顶部，金触点应指向电池接口。

务必使用脱脂剂如 windex 或异丙醇清洁压力接触。手指上的油脂有可能产生无线干扰。

[* icon_reminder] Before you reattach the battery connector during reinstallationreassembly, carefully position the pressure contact back in place. It should rest on top of the Philips screw post shown, and the gold contact should point towards the battery connector.
[* icon_reminder] Before you reattach the battery connector during reinstallationreassembly, carefully position the pressure contact back in place. It should rest on top of the Philips screw post shown, and the gold contact should point towards the battery connector.
[* icon_note] Be sure to clean the pressure contact with a degreaser such as windex or isopropyl alcohol. The oils on your fingers have the potential to create wireless interference.

在开源创作共享许可协议下，你的投稿已被许可。