跳转到主内容
英语
中文

正翻译步骤 6

步骤 6
On the non-camera side of the phone, remove the four 3mm screws and two 2.3mm screws holding down the twist-structure.
  • On the non-camera side of the phone, remove the four 3mm screws and two 2.3mm screws holding down the twist-structure.

  • When you lift this off, you will need to disconnect the cables from the other side using the same method as in step 5.

  • Again, be sure to record which port each cable was in and the orientation they were plugged into each socket.

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可