跳转到主内容

注:你正在为你查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的本指南

英语
中文

正翻译步骤 1

步骤 1
Locate the trackball assembly.  It is in the upper case and can be identified by a green circuit board. Open the white tab fastener by pulling out on each side.   and remove the green and silver ribbon cable.
  • Locate the trackball assembly. It is in the upper case and can be identified by a green circuit board.

  • Open the white tab fastener by pulling out on each side. and remove the green and silver ribbon cable.

  • Remove the green and silver ribbon cable by gently pulling it away from the opened tab fastener.

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可