注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的20指南。
正翻译步骤 5
步骤 5
-
Use the sharp end of a spudger to disconnect the speaker cable connector.
注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的20指南。
The connectors at the ends of the following cables are attached very firmly to the sockets on the logic board. Pulling directly on the cable will either separate the cable from its connector or the socket from the logic board.
Use the sharp end of a spudger to disconnect the speaker cable connector.
下一行
上一行
在下面插入新的一行
在上面插入新的一行
缩进当前行
取消缩进当前行
删除当前行
导航到下一步。
导航到上一步。
打开帮助