跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的2指南

英语
中文

正翻译步骤 4

步骤 4
The inverter board is the smaller board in the corner. Remove the three 7.69 mm Phillips #2 screws from the inverter board.
  • The inverter board is the smaller board in the corner.

  • Remove the three 7.69 mm Phillips #2 screws from the inverter board.

  • Remove the two 7.69 mm Phillips #2 grounding screws from the wire with the black connector.

  • Gently pull the inverter board away from the case. Note that the board is still connected to several components by wires.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可