跳转到主内容

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的7本指南

英语
中文

正翻译步骤 8

步骤 8
Remove the following 15 screws:
  • Remove the following 15 screws:

  • One 4.4 mm black Phillips screw to the right of the ram slot.

  • Eight 4.7 mm silver T6 Torx screws securing the logic board to the lower case.

  • If you leave the five uppermost orange screws in place, the heatsink/pipes come out effortlessly, still mounted onto the main board. That way its thermal connection is retained, and you won't need to reapply thermal paste as instructed two steps below.

  • One 6.2 mm black T6 Torx screw on the right side of the left fan.

  • Five 9.4 mm silver T6 Torx screws securing the left and right fans.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可