跳转到主内容
英语
中文

正翻译步骤 1

步骤 1
Set aside the printer body. Unscrew the T10 12 mm Torx screw.
  • Set aside the printer body.

  • Unscrew the T10 12 mm Torx screw.

  • Remove the plastic tab holding the glass in place.

  • Carefully lift the scanner glass panel above the plastic barrier and pull it towards the control panel circuitry. It can take quite a bit of force to get the panel to slide out. If not removed carefully, the scanner glass can shatter

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可