跳转到主内容
英语
德语

正翻译步骤 14

步骤 14
Repeat the above procedure to separate the second, lower battery cell from the rear case. Insert your cards only from the top edge of the battery cell and from the side opposite the logic board. Don't use any cards to pry under the battery from the bottom edge of the iPad, or you may damage ribbon cables for the speakers, antennas, and Lightning connector. Insert your cards only from the top edge of the battery cell and from the side opposite the logic board. Don't use any cards to pry under the battery from the bottom edge of the iPad, or you may damage ribbon cables for the speakers, antennas, and Lightning connector.
  • Repeat the above procedure to separate the second, lower battery cell from the rear case.

  • Insert your cards only from the top edge of the battery cell and from the side opposite the logic board. Don't use any cards to pry under the battery from the bottom edge of the iPad, or you may damage ribbon cables for the speakers, antennas, and Lightning connector.

Wiederhole diese Prozedur und trenne die zweite, untere Akkuzelle vom Rückgehäuse ab.

Setze die Karten nur von der Oberkante der Akkuzelle und von der Seite gegenüber dem Logic Board ein. Setze keine Karten an der Unterkante des iPads ein, du könntest sonst die Flachbandkabel der Lautsprecher, Antennen und des Lightning Connectors beschädigen.

在开源创作共享许可协议下,你的投稿已被许可