Skip to main content

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的3指南

英语
法语

正翻译步骤 1

Step 1
Use the spudger to lift the retaining flap on the Zero Insertion Force (ZIF) tab securing the thick ribbon cable. Slide out the ribbon cable using fingers or tweezers. Be sure you are prying up on the hinged retaining flap, not the connector.
  • Use the spudger to lift the retaining flap on the Zero Insertion Force (ZIF) tab securing the thick ribbon cable.

  • Slide out the ribbon cable using fingers or tweezers.

  • Be sure you are prying up on the hinged retaining flap, not the connector.

  • Using tweezers, disconnect the small ribbon cable below the flash assembly from the No Fuss Connector by simply pulling the ribbon cable straight out.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可