跳转到主内容
英语
中文

正翻译步骤 3

步骤 3
Use the spudger to lift the tab on the Zero Insertion Force (ZIF) connector located at the bottom of the motherboard. Be sure you are prying up on the hinged retaining flap, not the connector itself.
  • Use the spudger to lift the tab on the Zero Insertion Force (ZIF) connector located at the bottom of the motherboard.

  • Be sure you are prying up on the hinged retaining flap, not the connector itself.

  • Slide out the ribbon cable.

  • Use the spudger to pry up each side of the Flat-Topped Connectors

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可