正翻译步骤 8
步骤 8
-
There are three places that will have to be desoldered.
-
Positive battery contact
-
Negative battery contact
-
and a jumper
-
For the jumper the only thing required is to remove the solder between the pads.
-
Apply some flux to the jumper. The pliers will help to stabilize the PCB during soldering. any other means to hold it steady can be used.
您的所有投稿皆享有基于开源创作共享许可协议（CC BY-NC-SA）的著作权利。