跳转到主内容
英语
中文

正翻译步骤 6

步骤 6
Turn the monitor on its side so that the power supply and circuit board are facing to the right Remove the two 6.6 mm Phillips #2 screws located on both sides of the metal casing (four screws total). Remove the two 6.6 mm Phillips #2 screws located on both sides of the metal casing (four screws total).
  • Turn the monitor on its side so that the power supply and circuit board are facing to the right

  • Remove the two 6.6 mm Phillips #2 screws located on both sides of the metal casing (four screws total).

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可