跳转到主内容

修复你的物品

维修的权力

商店

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的指南

英语
中文

正翻译步骤 6

步骤 6
Remove the battery from the rear case.
  • Remove the battery from the rear case.

  • If your replacement battery came in a plastic sleeve, remove the sleeve before installation by pulling it away from the ribbon cable.

  • If there's any alcohol solution remaining in the phone, carefully wipe it off or allow it to air dry before installing your new battery.

  • Before you adhere the replacement battery, temporarily reconnect the battery connector to the logic board socket. This ensures that the battery is properly aligned in its recess.

  • Adhere the battery, disconnect it, and continue reassembling your device.

  • If your new battery doesn’t have adhesive preinstalled, refer to this guide to replace the adhesive strips.

  • Perform a force restart after reassembly. This can prevent several issues and simplify troubleshooting.

将电池从后壳上取下。

如果你的更换电池上有一层塑料纸,请在安装之前移除。

如果你的电池没有事先安装背胶, 参考这个指南来学习如何更换背胶。

重组后,请强制重启,这样可以预防一些问题的发生并会简化故障排除难度。

[* black] Remove the battery from the rear case.
[* icon_note] If your replacement battery came in a plastic sleeve, remove the sleeve before installation by pulling it away from the ribbon cable.
[* icon_reminder] If there's any alcohol solution remaining in the phone, carefully wipe it off or allow it to air dry before installing your new battery.
[* icon_reminder] Before you adhere the replacement battery, temporarily reconnect the battery connector to the logic board socket. This ensures that the battery is properly aligned in its recess.
[* black] Adhere the battery, disconnect it, and continue reassembling your device.
[* icon_reminder] If your new battery doesn’t have adhesive preinstalled, refer to [guide|56465|this guide] to replace the adhesive strips.
[* black] Perform a [https://support.apple.com/en-us/HT201559|force restarthttps://support.apple.com/guide/iphone/force-restart-iphone-iph8903c3ee6/ios|force restart|new_window=true] after reassembly. This can prevent several issues and simplify troubleshooting.
[* black] Perform a [https://support.apple.com/en-us/HT201559|force restarthttps://support.apple.com/guide/iphone/force-restart-iphone-iph8903c3ee6/ios|force restart|new_window=true] after reassembly. This can prevent several issues and simplify troubleshooting.

在开源创作共享许可协议下,你的投稿已被许可