跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的20指南

英语
中文

正翻译步骤 6

步骤 6
Insert the flat edge of a spudger into the bottom right corner of the device. Twist the spudger to widen the gap between the display assembly and the rear case. Slide the flat end of the spudger up the right side of the phone to break up the adhesive holding the display in place.
  • Insert the flat edge of a spudger into the bottom right corner of the device.

  • Twist the spudger to widen the gap between the display assembly and the rear case.

  • Slide the flat end of the spudger up the right side of the phone to break up the adhesive holding the display in place.

将撬棒的头插入设备的右下角。

移动撬棒以扩大屏幕和后壳之间的间隙。

将撬棒的头滑动,从而打开屏幕固定胶。

在开源创作共享许可协议下,你的投稿已被许可