跳转到主内容

修复你的物品

维修的权力

商店

英语
中文

正翻译步骤 14

步骤 14
And we finally reach the much awaited Apple S2 SiP—complete with the dreaded resin enclosure. On the top of the SiP,  tucked into the upper left corner, we spot a tiny pair of components: Bosch Sensortec BMP280 Barometric Pressure Sensor
  • And we finally reach the much awaited Apple S2 SiP—complete with the dreaded resin enclosure.

  • On the top of the SiP, tucked into the upper left corner, we spot a tiny pair of components:

  • Bosch Sensortec BMP280 Barometric Pressure Sensor

  • Likely an iteration of STMicroelectronics C451 gyroscope + accelerometer found in the original Apple Watch

  • But wait, isn't that the back? Where all the cables go? Turns out Apple decided to flip the SiP, so all of the connectors are on the same side as the things they connect to. Imagine that!

我们最终到达了期待已久的被树脂外壳包裹着的Apple S2 SiP.

在SiP的背面,夹在左上角,我们发现一对微小的组件:

博世BMP 280气压传感器

可能是上一代Apple Watch中迭代的意法半导体C451陀螺仪+加速度计

但是等等,这不就是背面吗?缆线 去哪了?原来苹果决定翻转SiP,所以所有的接口都在同一边。想想吧!

在开源创作共享许可协议下,你的投稿已被许可