跳转到主内容
英语
中文

正翻译步骤 6

步骤 6
We come across an unusual battery cable design. At first glance, this is most definitely a slide. We're getting a little motion sick just looking at all of those winding curves. Fortunately for us, a flick of a spudger is all it takes to pry the (off-kilter) battery connector cable off the motherboard. With battery disconnected we delve deeper.
  • We come across an unusual battery cable design. At first glance, this is most definitely a slide. We're getting a little motion sick just looking at all of those winding curves.

  • Fortunately for us, a flick of a spudger is all it takes to pry the (off-kilter) battery connector cable off the motherboard.

  • With battery disconnected we delve deeper.

  • First victim: the single speaker, with built in antenna.

  • Of note, the speaker pass-through has a gasket and mesh liner, in addition to the grille punched into the case (likely a waterproofing measure).

我们偶然发现一个不常见的电池线缆设计, 乍一看就像个滑梯。 当我们注视这个弯弯的曲线时,甚至感到了一点不适。

幸运的是, 撬棒轻轻一下就把电池线缆的连接头撬起来,脱离了主板。

- 断开了电池线缆之后,我们得以继续深入研究。

第一个牺牲品: 连接着内置天线的独立的扬声器

除了一个嵌入式的格栅,Note7的扬声器有一个垫片和网衬, 应该是一种防水措施。

在开源创作共享许可协议下,你的投稿已被许可