跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的指南

英语
中文

正翻译步骤 4

步骤 4
Bend the ribbon cable along the dotted lines to help the connectors remain seated in their sockets. Bend the ribbon cable 90 degrees at the SSD connector so that it is parallel to the connector.
  • Bend the ribbon cable along the dotted lines to help the connectors remain seated in their sockets.

  • Bend the ribbon cable 90 degrees at the SSD connector so that it is parallel to the connector.

沿着虚线弯曲带状电缆,以帮助连接器固定在插座中。

将带状电缆在SSD连接器上弯曲90度,使其与连接器平行。

在开源创作共享许可协议下,你的投稿已被许可