跳转到主内容
英语
中文

正翻译步骤 6

步骤 6
When inserting the headlight assembly back into the housing, make sure that the housing locator guides fit into the catches on both sides of the assembly. Push the assembly into the housing until you hear it click into place. Again use the 5mm nut driver to turn the locking nut that locks the assembly in its housing.
  • When inserting the headlight assembly back into the housing, make sure that the housing locator guides fit into the catches on both sides of the assembly.

  • Push the assembly into the housing until you hear it click into place.

  • Again use the 5mm nut driver to turn the locking nut that locks the assembly in its housing.

  • Turn on the ignition and check that the new bulb works. Close the hood.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可