跳转到主内容

修复你的物品

维修的权力

商店

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的指南

英语
中文

正翻译步骤 2

步骤 2
Remove all of the stickers on the back of the mouse. After doing so, you should see six screws on the back of the mouse. Use the Phillips #0 Screwdriver to remove all six of these 4mm screws.
  • Remove all of the stickers on the back of the mouse. After doing so, you should see six screws on the back of the mouse.

  • Use the Phillips #0 Screwdriver to remove all six of these 4mm screws.

  • Use the Phillips #00 Screwdriver to remove these two, 3mm screws.

  • Slide the side panels off of the mouse.

  • Use your tweezers to take the lock switches off of the mouse.

  • Using the T6 Torx screwdriver, remove the two bottom 4mm screws as indicated in the second picture.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可