跳转到主内容
英语
中文

正翻译步骤 15

步骤 15
iPod Nano 7th Generation Repairability Score: 5 out of 10 (10 is easiest to repair) Good: Once the display is removed, the rest of the disassembly is relatively straightforward.
  • iPod Nano 7th Generation Repairability Score: 5 out of 10 (10 is easiest to repair)

  • Good: Once the display is removed, the rest of the disassembly is relatively straightforward.

  • Good: The ribbon cable connectors make it easy to disconnect the display and headphone jack from the logic board.

  • Neutral: The headphone jack and volume buttons are attached to the same ribbon cable and must be replaced at the same time.

  • Bad: Getting the display off of the device requires the use of a heat gun, as there is a lot of adhesive holding it in place.

  • Bad: The battery is soldered to the logic board, making replacement of a single component more cumbersome.

第六代Pod Nano(2011)可维修性得分:5分(10分最容易修复)

好:一旦显示屏被拆下,其余的拆卸就比较简单。

好:带状电缆连接器可以方便地将显示屏和耳机插孔从逻辑板上断开。

中:耳机插孔和音量按钮连接到同一条带状电缆,必须同时更换。

坏:将显示屏从设备上取下需要使用热风枪,因为有很多粘合剂。

坏:将电池焊接到逻辑板上,使更换单个组件更麻烦。

在开源创作共享许可协议下,你的投稿已被许可