跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的19指南

英语
中文

正翻译步骤 2

步骤 2
Slide the flat end of a spudger under the battery side of the digitizer board to begin separating it from the rear case. Slide the flat end of a spudger under the battery side of the digitizer board to begin separating it from the rear case.
  • Slide the flat end of a spudger under the battery side of the digitizer board to begin separating it from the rear case.

将撬棒扁平的一端滑入电池一侧的数字化板下,来将其与后壳相分离。

在开源创作共享许可协议下,你的投稿已被许可