跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的19指南

英语
意大利语

正翻译步骤 2

步骤 2
Slide the flat end of a spudger under the battery side of the digitizer board to begin separating it from the rear case. Slide the flat end of a spudger under the battery side of the digitizer board to begin separating it from the rear case.
  • Slide the flat end of a spudger under the battery side of the digitizer board to begin separating it from the rear case.

Fai scorrere la parte piatta di uno spudger sotto il bordo vicino alla batteria della scheda del digitizer per iniziare a rimuovere la cella dalla scocca.

在开源创作共享许可协议下,你的投稿已被许可