跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的2指南

英语
中文

正翻译步骤 4

步骤 4
Peel up the last of the tape holding the home button ribbon cable in place by inserting an opening pick between the cable and the digitizer. Continue sliding the pick underneath the cable until it is wholly separated from the front panel
  • Peel up the last of the tape holding the home button ribbon cable in place by inserting an opening pick between the cable and the digitizer.

  • Continue sliding the pick underneath the cable until it is wholly separated from the front panel

  • Do not attempt to remove the home button yet. Is is still held in place by a strongly adhered bracket and delicate gasket.

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可