跳转到主内容
英语
中文

正翻译步骤 15

Step 15
To finish up;
  • To finish up;

  • slide the grommet back down to the end of the cable and use a pair of pliers to gently squeeze the metal clamp shut again

  • Optionally seal the PCB with Areldite or perhaps hot glue but you can get by just fine without

  • Slide the plastic cover back down over your work - it'll probably be tight enough to snap back into place but if not a couple of drops of super glue should be enough

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可