跳转到主内容
英语
中文

正翻译步骤 12

Step 12
reattach the leads starting with the central (white) strand directly to the PCB
  • reattach the leads starting with the central (white) strand directly to the PCB

  • Then solder one strand of the shield to the opposite side of the circuit board

  • Flip the plug over and solder the remaining end of the shield to the opposite side

  • Hint: The goal here is to make sure that the divided shield distributes any strain equally between front and rear sides and avoids straining the central wire

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可