跳转到主内容

修复你的物品

维修的权力

配件 & 工具

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的15本指南

英语
中文

正翻译步骤 1

步骤 1
Use the pointed end of a spudger to disconnect the display data connector from its socket on the logic board. Use the pointed end of a spudger to disconnect the digitizer cable connector from its socket on the logic board. When reconnecting these, press down from one end of the connector to the other. If you press in the middle of the connector, you may bend it, causing damage or a poor connection.
  • Use the pointed end of a spudger to disconnect the display data connector from its socket on the logic board.

  • Use the pointed end of a spudger to disconnect the digitizer cable connector from its socket on the logic board.

  • When reconnecting these, press down from one end of the connector to the other. If you press in the middle of the connector, you may bend it, causing damage or a poor connection.

用一个尖头撬棒分离屏幕排线。

用一个尖头排线分离传感器排线。

在拆除排线时, 务必注意排线连接器很脆弱, 需要从排线连接器的边缘用力, 如果从中间用力,可能回导致连接器弯曲损坏。

在开源创作共享许可协议下,你的投稿已被许可