跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的8指南

英语
意大利语

正翻译步骤 1

步骤 1
To get to the screws beneath the keyboard you need to take some keys off. You can use either an opening tool or an opening pick. The first picture shows how it should look like with all the necessary keys off (12 in total). The four longer keys from the fingerboard are to be handled from the left side to get them off. The eight smaller keys need to be levered from the bottom up.
key removal
  • To get to the screws beneath the keyboard you need to take some keys off. You can use either an opening tool or an opening pick. The first picture shows how it should look like with all the necessary keys off (12 in total).

  • The four longer keys from the fingerboard are to be handled from the left side to get them off.

  • The eight smaller keys need to be levered from the bottom up.

Per raggiungere le viti disposte sotto la tastiera, devi prima togliere alcuni tasti. Puoi usare uno strumento di apertura o un plettro. La prima immagine mostra come il dispositivo dovrebbe presentarsi dopo aver rimosso le chiavi necessarie (12 in tutto).

Per i quattro tasti più lunghi della tastiera, si deve intervenire a partire dal lato sinistro.

Per staccare gli otto tasti più piccolibisogna iniziare dal basso.

在开源创作共享许可协议下,你的投稿已被许可