注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的7本指南

英语
中文

正翻译步骤 1

步骤 1
Remove the 7.9 mm T6 Torx screw securing the power supply and hard drive tray to the outer case.
  • Remove the 7.9 mm T6 Torx screw securing the power supply and hard drive tray to the outer case.

  • During reassembly, ensure the cables that run alongside the hard drive are tucked under the power supply. This will ensure the hard drive is properly seated. In addition, the antenna screw holes will not line up if there are cables in the way.

移除将电源和硬盘托架固定到外壳的7.9mm T6 梅花螺丝。

在重组时,确保硬盘的线缆挤在电源的下方。 这将确保硬盘安装到位。 此外,天线螺丝孔会被阻挡,如果安装不到位的话。

在开源创作共享许可协议下,你的投稿已被许可