注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的9本指南

英语
中文

正翻译步骤 1

步骤 1
Pull the hard drive away from the front edge of the mini and remove it from the outer case. During reassembly, there are two pins on the inside edge of the hard drive that fit into the case. The holes have rubber grommets around them, so it may be difficult to tell when you have seated the hard drive correctly.
  • Pull the hard drive away from the front edge of the mini and remove it from the outer case.

  • During reassembly, there are two pins on the inside edge of the hard drive that fit into the case. The holes have rubber grommets around them, so it may be difficult to tell when you have seated the hard drive correctly.

  • There are two pairs of holes in the case. Insert the pins into the holes closest to the bottom of the case.

将硬盘驱动器从迷你的前边缘处拉开,并将其从外壳中取出。

在重新组装时,硬盘驱动器的内侧边缘上有两个插脚插入外壳。 孔周围有橡胶环,所以可能很难分辨硬盘是否安装到正确位置。

[* black] Pull the hard drive away from the front edge of the mini and remove it from the outer case.
[* icon_note] During reassembly, there are two pins on the inside edge of the hard drive that fit into the case. The holes have rubber grommets around them, so it may be difficult to tell when you have seated the hard drive correctly.
[* icon_note] There are two pairs of holes in the case. Insert the pins into the holes closest to the bottom of the case.

在开源创作共享许可协议下,你的投稿已被许可