跳转到主内容

iMac Intel 21.5" 4K Retina-scherm Vervanging van de schermmodule

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的27指南

英语
荷兰语

正翻译步骤 2

步骤 2
iMac Intel 21.5" Retina 4K Display Assembly Replacement: 步骤 0 中的图像 1,3 iMac Intel 21.5" Retina 4K Display Assembly Replacement: 步骤 0 中的图像 2,3 iMac Intel 21.5" Retina 4K Display Assembly Replacement: 步骤 0 中的图像 3,3
  • Be very careful not to touch the capacitor leads or any exposed solder joints on the back of the power supply (boxed in red).

  • Grasp the small tab at the end of one of the bottom edge display adhesive strips and pull the adhesive toward the top of the iMac to remove it.

  • Repeat this step with the other adhesive strip and remove it.

  • If either adhesive strip breaks before it's removed, use a plastic card to slice through the remaining adhesive.

Ga voorzichtig te werk en voorkom dat je de pinnen van de condensatoren of de blootliggende soldeerverbindingen aan de achterkant van de printplaat van de stroomvoorziening (in de afbeelding met rood gemarkeerd) aanraakt.

Pak het kleine lipje aan het einde van een van de kleefstrips aan de onderkant van het scherm vast en trek de strip richting de bovenkant van de iMac om die te verwijderen.

Herhaal deze stap voor het verwijderen van de andere kleefstrip.

Als een van de kleefstrips afbreekt, pak je een plastic kaart om de resterende lijm door te snijden.

您的所有投稿皆享有基于开源创作共享许可协议(CC BY-NC-SA)著作权利