跳转到主内容

修复你的物品

维修的权力

配件 & 工具

英语
中文

正翻译步骤 17

步骤 17
Start the car and look for leaks under the car. If there are leaks, shut the car off and determine if the drain plug or filter need to be tightened, or if a part has been damaged. After running the engine for a few minutes, let it cool down for at least an hour and re-check the oil level. If the oil level is more than a 1/2" above the top hole of the dipstick you will need to drain oil. If the oil level is below the bottom hole of the dipstick you will need to add oil.
  • Start the car and look for leaks under the car. If there are leaks, shut the car off and determine if the drain plug or filter need to be tightened, or if a part has been damaged.

  • After running the engine for a few minutes, let it cool down for at least an hour and re-check the oil level. If the oil level is more than a 1/2" above the top hole of the dipstick you will need to drain oil. If the oil level is below the bottom hole of the dipstick you will need to add oil.

  • Allow 12-24 hours for all the oil to drain out of your old oil filter.

  • Take your old oil and filter to a recycling facility. Most auto parts stores and repair shops accept these at no charge. In addition, some cities and/or counties have a service where they will collect used oil and filters from your home. For more information, see the American Petroleum Institute's web page on used motor oil collection and recycling.

打着车,在车下寻找是否漏油。 如果有漏油,请关闭汽车,并确定排油塞或油滤是否需要拧紧,或者是零件损坏。

运行发动机几分钟后,让它冷却至少一个小时,重新检查油位。 如果油位高于量油尺顶孔的1/2“,则需要排出油,如果油位低于量油尺的底部孔,则需要加油。

让旧油滤残留的油滴干,这通常会需要12-24小时。

带上你的旧机油和旧的油滤前往回收的地方吧。大多数的汽车零件商店和修理厂会无偿回收。 除此之外一些城市或者国家会提供上门回收旧机油和油滤。 详情参见美国石油协会的网站 http://www.recycleoil.org/

在开源创作共享许可协议下,你的投稿已被许可