跳转到主内容

修复你的物品

维修的权力

配件 & 工具

英语
中文

正翻译步骤 13

步骤 13
Locate the oil dipstick. It is at the front of the engine along its center line. Pull out the oil dipstick, wipe it off, place it all the way back into its hole and remove again.
  • Locate the oil dipstick. It is at the front of the engine along its center line.

  • Pull out the oil dipstick, wipe it off, place it all the way back into its hole and remove again.

  • Observe the oil level on the end of the dipstick. It should be between the two holes or slightly above the top one.

  • This is not your actual oil level, but a pre-check to make sure the engine will not run dry when you first start it. The oil level will drop slightly after the first run when oil fills the new oil filter.

  • Add oil if the oil level is below the bottom hole of the dipstick. Place the oil dipstick all the way back in it's hole.

找到油尺。 它位于发动机前侧中心线上。

拉出油尺,将其擦干,将其放回其孔中,再次取出。

观察量油尺末端的油位。 它应该在两个孔之间或略高于顶部。

这不是你的实际油位,而是一个预先检查,以确保发动机首次启动时不会缺少机油。 第一次运行时当机油充满新的油滤后,油位将略有下降。

如果机油位低于油尺的底部孔,请加油。 将油尺放在孔中。

在开源创作共享许可协议下,你的投稿已被许可