跳转到主内容

修复你的物品

维修的权力

配件 & 工具

英语
中文

正翻译步骤 7

步骤 7
To reach the oil filter, guide your hand around the back side of the drive axle and up toward the top of the engine. Be careful if the engine has been running recently. The engine and exhaust components may be very hot. Twist the oil filter counter-clockwise with your hand until it comes off the threads on the engine block.
  • To reach the oil filter, guide your hand around the back side of the drive axle and up toward the top of the engine.

  • Be careful if the engine has been running recently. The engine and exhaust components may be very hot.

  • Twist the oil filter counter-clockwise with your hand until it comes off the threads on the engine block.

  • If the filter is too tight to loosen by hand, use an oil filter wrench. A wrench that fits over the top of the oil filter is necessary, as there is very little space on the sides of the oil filter.

  • Lower the oil filter out of the engine bay with the threads facing up, then place it in the oil drain pan with the threads facing down.

  • Wipe off as much spilled oil as possible.

要够到油滤,手伸到驱动轴的后侧并朝向发动机顶部。

如果发动机最近运行过,请小心。 发动机和排气部件可能非常热。

用手逆时针旋转油滤,直到它从引擎缸体上松动下来。

如果油滤太紧而不能用手松开,请使用油滤扳手。 需要在油滤顶部放置扳手,因为油滤两侧的空间很小。

将油滤从发动机上取下来,然后将其放在排油盘中,螺纹朝下。

擦掉尽可能多的溢油。

在开源创作共享许可协议下,你的投稿已被许可