跳转到主内容

修复你的物品

维修的权力

配件 & 工具

英语
中文

正翻译步骤 2

步骤 2
Place the jack under the lifting point and raise the front of the car until you can fit underneath it. Place a jack stand under the stand point.
  • Place the jack under the lifting point and raise the front of the car until you can fit underneath it.

  • Place a jack stand under the stand point.

  • Slowly lower the jack until the jack stand is supporting the car and the jack isn't. Remove the jack.

  • Many hydraulic jacks are lowered by placing the open end of the handle over a knob and turning it counter-clockwise. Consult your owners manual for your jack if you don't know how to lower it.

  • It is helpful, but not necessary, to jack up both sides of the car. Since the oil drain plug is on the driver's side of the car, lifting just the driver's side should be sufficient.

  • Never work underneath a car that is only supported by a jack. The jack may slip or fail, resulting in serious injury or death.

将千斤顶放在抬升点下方,抬起汽车的前部,直到你可以进入汽车的下面。

将千斤顶支架放置在支点下方。

缓慢地降低千斤顶,直到千斤顶支架支撑着汽车。 移走千斤顶。

许多液压千斤顶通过将手柄的开口一端放在千斤顶的旋钮上并逆时针转动来降低千斤顶。 如果您不知道如何降低它,请查询您的使用手册。

这是有帮助的,但不是必要的,把车两侧都顶起来。 由于排油塞在汽车的驾驶侧仅抬起一侧就足够了。

不要在只有千斤顶支撑车辆的情况下进入车底作业. 千斤顶有可能滑动或倒下, 这将可能造成严重伤害甚至死亡.

在开源创作共享许可协议下,你的投稿已被许可