Mac mini Mid 2011 Logic Board Replacement

注：你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的20指南。

英语

韩语

上一步下一步

正翻译步骤 4

步骤 4

Mac mini Mid 2011 Logic Board Replacement: 步骤 0 中的图像 1，3

Mac mini Mid 2011 Logic Board Replacement: 步骤 0 中的图像 2，3

Mac mini Mid 2011 Logic Board Replacement: 步骤 0 中的图像 3，3

To remove the logic board, the two cylindrical rods of the Mac mini Logic Board Removal Tool must be inserted into the holes highlighted in red. Inserting instruments into any logic board holes other than the ones highlighted in red may destroy the logic board.
Insert the Mac mini Logic Board Removal Tool into the two holes highlighted in red. Be sure it makes contact with the top side of outer case below the logic board before proceeding.
Carefully pull the tool toward the I/O board. The logic board and I/O board assembly should slightly slide out of the outer case.
Cease prying when the I/O board is visibly separated from the outer case.
Remove the Mac mini Logic Board Removal tool.

您的所有投稿皆享有基于开源创作共享许可协议（CC BY-NC-SA）的著作权利。