跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的2指南

英语
中文

正翻译步骤 30

步骤 30
Insert an opening pick underneath  the logic board at the corner of the large EMI shield. Slide the pick upwards until you reach the battery connector to break up the adhesive holding the logic board in place. Slide the pick upwards until you reach the battery connector to break up the adhesive holding the logic board in place.
  • Insert an opening pick underneath the logic board at the corner of the large EMI shield.

  • Slide the pick upwards until you reach the battery connector to break up the adhesive holding the logic board in place.

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可