跳转到主内容
英语
中文

正翻译步骤 3

步骤 3
Place the desoldering wick on top of the existing solder ball.
  • Place the desoldering wick on top of the existing solder ball.

  • Place the soldering iron on top of wick above the existing solder ball.

  • Hold the soldering iron in place until the solder melts into the wick.

  • Repeat the same procedure on the remaining two connectors.

  • Lift the old battery out of the iPod. Be sure that all the solder has been removed before pulling the wires away from the board. The wires should come free with little to no resistance.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可