翻译步骤＃6 - iPod Touch 1st Generation Logic Board Replacement - iFixit

取消

注：你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的4本指南。

英语

中文

上一步下一步

正翻译步骤 6

步骤 6

Be careful when flipping up the logic board. The headphone jack and docking port are attached to the board.

Gently lift the logic board (and attached components) upward.

The smaller portion of the logic board that resides underneath is very bendable and frail. Make sure not to pull the spudger upward when using it to detach the small board. Use only side-to-side movement.

Be careful when flipping up the logic board. The headphone jack and docking port are attached to the board.
Gently lift the logic board (and attached components) upward.
The smaller portion of the logic board that resides underneath is very bendable and frail. Make sure not to pull the spudger upward when using it to detach the small board. Use only side-to-side movement.
Slide the spudger under the small portion of the logic board. The board should come loose once the spudger has slid almost all the way to the other side.

在开源创作共享许可协议下，你的投稿已被许可。