修复你的物品

维修的权力

商店

注：你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的19指南。

返回指南
英语
中文

正翻译步骤 1

步骤 1
In this step you will disconnect the battery to help avoid shorting out any components during service. Use the flat end of a spudger to pry both short sides of the battery connector upward to disconnect it from its socket on the logic board.

  • In this step you will disconnect the battery to help avoid shorting out any components during service.

  • Use the flat end of a spudger to pry both short sides of the battery connector upward to disconnect it from its socket on the logic board.

  • Bend the battery cable slightly away from the logic board so the connector will not accidentally contact its socket.

在此步驟中，建议断开电池电源，以避免在维修期间短路任何组件。

使用撬棒的平头将电池连接器的两个短边向上撬开，使其与逻辑板上的插座断开连接。

将电池电线远离逻辑板，使连接器不会意外接触插座。

在开源创作共享许可协议下，你的投稿已被许可。